Technical data:

  • Shear strength (at 20 ° C)
  • (Dynamometer Zwick, Lap Shear Test) ................. 140 ÷ 180 N / mm2;
  • Tensile peeling off (at 20 ° C)
  • (Dynamometer Zwick, Peel Test) ........................... 6 ÷ 8 N / mm;
  • Water absorption (at 20 ° C) ............................... below 1%;
  • During the fixation (20 ° C) ............................... 60 ÷ 75 min .;
  • Operating time (open time) ................... 45-55 minutes.


Typical applications - for sticking:



  • Ferrous and non-ferrous metals;
  • Ceramics, glass, stone and construction materials;
  • fiberglass;
  • Bakelite, getinaks, laminated;
  • wood;
  • Others.

Kanopoks 11



New series epoxy adhesive. Mixing ratio 1: 1, which makes them suitable for use in the econom advantageous.


Technology sticking with Kanokonlit® Epoxy and Kanopoks 11:


Surface preparation : The surfaces should be cleaned and polished by using sand paper and obezmaslyavats organic solvent (acetone, toluene, benzene, etc.). Preporachitelnosredstvo cleaning surfaces is particularly razrabotenatakompozitsiya solvent "Chistin EA" in the "Special Polymers" Ltd. Prilepene metals preferably metal surfaces at - forward to seobrabotyat with a solution of a mixture of hydrochloric acid and an oxidizing agent (alkalenbihromat) wash then a solution of detergent and seizsushat.





Applying the adhesive : The hardener and resin metered in equal amounts (weighted akoe possible), and the mixture was admixed thoroughly homogenized. Ccc smeared as a thin layer of each of the surfaces concatenated carefully Ise kept tightly pressed together for a long time (minimum6 hours under compression for 24 h. To give maksimalnayakost).



Market cuts adhesives series Structural adhesives:





products

Packing

10 g.

20 g.

40 g.

100 g.

200 g.

Upon request

Kanokonlit - Urethane

-

-

Yes

-

-

Yes

Kanokonlit - Epoxy

Yes

-

-

-

-

-

Kanopoks 11

-

Yes

Yes

Yes

Yes

Yes

Kanopoks 3M

Yes

-

-

-

-

-